ScanGaugeII

A ScanGaugeII is an integrated Trip Computer providing real time feedback while simultaneously tracking multiple sets of trip data. The Digital Gauges give you real time data for your vehicle and the built-in Scan Tool allows you to read trouble codes and diagnose potentially expensive problems before they get out of hand.

The top picture shows a ScanGaugeII. The pictures below it on the left are an OBDII (on board diagnostics II) plug supplied by vehicle manufacturers (All cars built since January 1, 1996 have OBD-II systems.) in a typical location under the dashboard near the steering column, next a close up view of the vehicle's OBDII connection plug, then a picture of the ScanGaugeII supplied cable (one end has a male OBDII connection and the other has a RJ45 plug for connection to the side or back of the ScanGaugeII instrument).

The pictures below it on the right are an example of an installed view, and a picture showing dimensions to assist in deciding on a location for mounting or storage on your specific vehicle. Double sided tape with velcro attached is also supplied in aiding attachment. Specific installation method or location is up to user preference.

ScangaugeII

Typical OBDII Location

OBDII Plug

ScanGaugeII Cable		 ScabGaugeII Installed

ScanGaugeII dimensions


$169.95 MSRP Price

$159.95 Sales Price

$19.95 S & H

$179.90 Total w/o FL Sales Tax
(shipment to address outside FL)

If Required,

$10.80 FL Sales Tax

$190.70 Total with FL Sales Tax
(shipment to a FL address)

Optional ($19.95) spare cable Sold Separately - to use this instrument on another vehicle.


* Call for special promotions when included as part of a Total System Package *


• If your boat's engine has an OBDII connection (plug) installed, a ScanGaugeII may be used very effectively to monitor, verify (back up), and adjust many functions, electronics, and engine instruments. Some great examples are Fuel Flow, RPM, Temperatures, Pressures, Voltage, ...

• View causes (codes) that bring on "Check Engine Light" without making or paying an expensive trip to a Dealership just to know what is wrong. It may be something as simple as the gas cap was left open. After the problem is solved or for diagnostic checks, the ScanGaugeII is able to clear (reset) the check engine light.

  Check Engine Light     Dash View of Check Engine Light     Dash View of Service Engine Soon Light

• Full instrument details plus displayable user programming explained in supplied installation and instruction manual.

TRIP COMPUTER
Trip Computer Screen
Automatically tracks four sets of trip data - Each with 11 individually stored parameters.
  • Maximum Speed
  • Average Speed
  • Maximum Coolant Temperature
  • Maximum RPM
  • Driving Time
  • Driving Distance
  • Fuel Used
  • Trip Fuel Economy
  • Distance to Empty
  • Time to Empty
  • Fuel to Empty
DIGITAL GAUGES
Digital Gauge Screen
Display 4 gauges at a time from the 12 built-in digital gauges - The information is presented in Real-time.
  • Fuel Economy
  • Fuel Rate
  • Battery Voltage
  • Coolant Temperature
  • Intake Air Temperature
  • Engine Speed (RPM)
  • Vehicle speed (MPH)
  • Manifold Pressure (not available on some vehicles)
  • Engine Load
  • Throttle Position
  • Ignition Timing
  • Open/Closed Loop
SCAN TOOL
Scan Tool Screen
The ScanGaugeII allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the “Check Engine” light and avoid those costly trips to the mechanic.
  • Reads Trouble Codes
  • Reads conditions that set the Trouble Code
  • Clears Trouble Codes
  • Turns off the "Check Engine" light
  • Tells you when vehicle is "Ready" to pass OBDII testing
  • Make and store up to 10 rewritable special codes to send to the vehicle computer

• Specifications, availability, and pricing are subject to change